View TCG057VGLBA-G00_5382109.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

spec no. tq3c-8eaf0-e1ddp30-03 ? s p e c date april 8, 2008 t y p e : t c g 0 5 7 v g l b a - g 0 0 < 5.7 inch vga transmissive color tft with led backlight> c o n t e n t s 1. application 2. construction and outline 3. mechanical specifications 4. absolute maximum ratings 5. electrical characteristics 6. optical characteristics 7. interface signals 8. input timing characteristics 9. backlight characteristics 10. lot number identification 11. warranty 12. precautions for use 13. reliability test data 14. outline drawing kyocera corporation ? kagoshima hayato plant lcd division ??? this specification is subject to change without notice. consult kyocera before ordering. designed by: engineering dept. confirmed by: qa dept. original issue date prepared checked approved checked approved september 8, 2007 "qs www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page - warning 1. this kyocera lcd module has been sp ecifically designed for use only in electronic devices and industrial mach ines in the area of audio control, office automation, industrial contro l home appliances, etc. the module should not be used in applications where the highest level of safety and reliability are required and module fa ilure or malfunction of such module results in physical harm or loss of life, as well as enormous damage or loss. such fields of applications include, without limitation, medical, aerospace, communications infrastructure, atomic energy control. kyocera expressly disclaims any and all liability resulting in any way to the use of the module in such applications. 2. customer agrees to indemnity, defend and hold kyocera harmless from and against any and all actions, claims, damages, liabilities, awards, costs, and expenses, including legal expenses, resulting from or arising out of customer's use, or sale for use, or kyocera modules in applications. caution 1. kyocera shall have the right, whic h customer hereby acknowledges, to immediately scrap or destroy tooling for kyocera modules for which no purchase orders have been received from the customer in a two-year period. www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page - revision record designed by : engineering dept. confirmed by : qa dept. date prepared checked approved checked approved apr. 8, 2008 rev.no. date page descriptions 2. construction and outline ? add comment additional circuit 1 3. mechanical specifications ? change mass 2 4. absolute maximum ratings ? delete ( ) 3 5. electrical characteristics ? delete ( ) ? add current consumption value 4 6. optical characteristics ? delete ( ) ? change all 9 9. led backlight characteristics ? delete ( ) ? change operating life time 01 dec. 12, 2007 13 14. outline drawing ? change 121a5063000 121a5063000-1 02 feb. 29, 2008 4 6. optical characteristics ? change response time down 03 apr. 8, 2008 14 14. outline drawing ? add outline drawing 121a5065800 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 1 m019070 ???????????????????????????????? 1. application this document defines the specification of TCG057VGLBA-G00. (rohs compliant) 2. construction and outline lcd backlight system polarizer additional circuit : transmissive color dot matrix type tft : led : glare treatment : timing controller, power supply (3.3v input) (without constant current circuit for led backlight) 3. mechanical specifications item specification unit outline dimensions 127.2 (w) 100.4 (h) 5.7 (d) mm active area 115.2 (w) 86.4 (h) (14.4cm / 5.7 inch (diagonal)) mm dot format 640(b,g,r) (w) 480 (h) dot dot pitch 0.06 (w) 0.18 (h) mm base color *1 normally white - mass 110 g *1 due to the characteristics of the lcd material, the color varies with environmental temperature. www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 2 m019070 ???????????????????????????????? 4. absolute maximum ratings 4-1. electrical absolute maximum ratings item symbol min. max. unit supply voltage for logic v dd 0 4.0 v input signal voltage *1 v in -0.3 6.0 v led forward current *2 if - 30 ma reversed voltage *2 vr - 5 v ? ?? *1 input signal : ck, r0 ? r5, g0 ? g5, b0 ? b5, h sync , v sync , enab, r/l, u/d *2 for each ?an1-ca1?, ?an2-ca2? and ?an3-ca3? temp. = 25c 4-2. environmental absolute maximum ratings item symbol min. max. unit operating temperature *1 t op -20 70 c storage temperature *2 t sto -30 80 c operating humidity *3 h op 10 *4 %rh storage humidity *3 h sto 10 *4 %rh vibration - *5 *5 - shock - *6 *6 - *1 operating temperature means a temperature which operation shall be guaranteed. since display performance is evaluated at 25c, another temperature range should be confirmed. *2 temp. = -30c ? 48h , temp. = 80c ? 168h ??? store lcd panels at normal temperature/humidity. keep them free from vibration and shock. an lcd panel that is kept at a low or a high temperature for a long time can be defective due to other conditions, even if the low or high temperature satisfies the standard. ? (please refer to ?precautio ns for use? for details.) ?? ?? *3 non-condensing ? *4 temp. ? 40c, 85%rh max. ?? temp. ? 40c, absolute humidity shall be less than 85%rh at 40c. ? *5 ?? frequency 10 ? 55 hz vibration width 0.15mm acceleration value (0.3 ? 9 m/s 2 ) interval 10-55-10 hz ? minutes ??????? 2 hours in each direction x, y, z (6 hours total) ??????? eiaj ed-2531 ? *6 acceleration: 490 m/s 2 , pulse width: 11 ms ? 3 times in each direction: x, y, z ??? eiaj ed-2531 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 3 m019070 ???????????????????????????????? 5. electrical characteristics ????????????? ???? temp. = -20 ? 70c item symbol condition min. typ. max. unit supply voltage for logic *1 v dd - 3.0 3.3 3.6 v current consumption for logic i dd *2 - 170 220 ma permissive input ripple voltage v rp - - - 100 mvp-p v il "low" level 0 - 0.3v dd v input signal voltage *3 v ih "high" level 0.7v dd - v dd v *1 v dd -turn-on conditions ???????????????????????????????? 0 ? t1 ? 20ms ?????????????????????????????????? ??? 0 ? t2 ? 50ms ??????????????????????????????? ? ? 0 ? t3 ? 1s *2 display pattern: v dd = 3.3v, temp. = 25c 123 456 789 ~~~~~~~~~~~~~~~ 1918 1919 1920 (dot) ? 1 2 3 : : : 479 480 (dot) ?????????? ?????????? ?????????? ?????????? ?????????? ?????????? ?????????? ?????????? *3 input signal : ck, r0 ? r5, g0 ? g5, b0 ? b5, h sync , v sync , enab, r/l, u/d v dd 3.0v 3.0v 0.3v t1 t2 t3 signal *3 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 4 m019070 ???????????????????????????????? 6. optical characteristics ?? ????????? ???????? measuring spot = 6.0mm, temp. = 25c item symbol condition min. typ. max. unit rise r = =0 - 10 - ms response time down d = =0 - 25 - ms upper - 80 - lower - 80 - deg. left - 80 - viewing angle range view direction : 6 o?clock (gray inversion) right cr ? 5 - 80 - deg. contrast ratio cr = =0 300 500 - - brightness l if=15ma/line 175 250 - cd/m 2 x 0.56 0.61 0.66 red y = =0 0.32 0.37 0.42 x 0.29 0.34 0.39 green y = =0 0.52 0.57 0.62 x 0.09 0.14 0.19 blue y = =0 0.06 0.11 0.16 x 0.27 0.32 0.37 chromaticity coordinates white y = =0 0.29 0.34 0.39 - 6-1. definition of contrast ratio cr(contrast ratio) 1 brightness with all pixels "white" brightness with all pixels "black" 6-2. definition of response time 90./;5,:: ? + ? 9 /0;, 3(*2 /0;, www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 5 m019070 ???????????????????????????????? 6-3. definition of viewing angle ? 6-4. brightness measuring points 1) rating is defined on the average in the viewing area. 2) measured 30 minutes after the led is powered on. (ambient temp. = 25c) ?? ? ?@ @ ? ?? ? ?@ ? ?+09,*;065 ?+09,*;065 @ (dot) (dot) 3 03 03 0 0 1 2 3 4 5 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 6 m019070 ???????????????????????????????? 7. interface signals no. symbol description i/o note 1 gnd gnd - 2 ck clock signal for sampling each data signal i 3 h sync horizontal synchronous signal (negative) i 4 v sync vertical synchronous signal (negative) i 5 gnd gnd - 6 r0 red data signal (lsb) i 7 r1 ? red data signal i 8 r2 ? red data signal i 9 r3 ? red data signal i 10 r4 ? red data signal i 11 r5 ? red data signal (msb) i 12 gnd ? gnd - 13 g0 ? green data signal (lsb) i 14 g1 ? green data signal i 15 g2 ? green data signal i 16 g3 ? green data signal i 17 g4 ? green data signal i 18 g5 green data signal (msb) i 19 gnd ? gnd - 20 b0 ? blue data signal (lsb) i 21 b1 ? blue data signal i 22 b2 ? blue data signal i 23 b3 ? blue data signal i 24 b4 ? blue data signal i 25 b5 ? blue data signal (msb) i 26 gnd ? gnd - 27 enab signal to settle the hori zontal display position (positive) i *1 28 v dd ? 3.3v power supply - 29 v dd ? 3.3v power supply - 30 r/l horizontal display mode select signa l l : normal , h : left / ri g ht reverse mode i *2 31 u/d vertical display mode select signa l h : normal , l : u p / down reverse mode i 32 nc ? no connect - 33 ca1 ? cathode 1 - 34 ca2 ? cathode 2 - 35 ca3 ? cathode 3 - 36 nc ? no connect - 37 an1 ? anode 1 - 38 an2 ? anode 2 - 39 an3 ? anode 3 - 40 nc ? no connect - ???? lcd connector imsa-9681s-40a-gf (iriso) ???? recommended matching ffc or fpc 0.5mm pitch www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 7 m019070 ???????????????????????????????? *1 the horizontal display start timing is settled in accordance with a rising timing of enab signal. in case enab is fixed "low", the horizontal start timing is determined. don't keep enab "high" during operation. *2 r/l = l ??????????? r/l = h u/d = h ?????????? u/d = h r/l = l ??????????? r/l = h u/d = l ?????????? u/d = l www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 8 m019070 ???????????????????????????????? 8. input timing characteristics 8-1. timing characteristics item symbol min typ max unit note frequency 1/tc 25.18 28.88 mhz clock duty ratio tch/tc 40 50 60 % set up time tds 10 ns data hold time tdh 10 ns 30.0 31.8 s cycle th 770 800 900 clock pulse width thp 5 30 clock set up time ths 10 ns horizontal sync. signal hold time thh 10 ns cycle tv 515 525 560 line pulse width tvp 1 3 5 line set up time tvs 10 ns vertical sync. signal hold time tvh 10 ns pulse width tep 640 clock set up time tes 10 ns enable signal (enab hold time teh 10 ns h sync - enable signal phase difference the 112 144 175 clock h sync - v sync signal phase difference thv 10 ns vertical sync. signal start position tve 2 35 76 line horizontal display period thd 640 clock vertical display period tvd 480 line *when enab is fixed at "low", th e horizontal display starts from the data of c144 (clock) as shown in 8-3. *when enab is fixed at "low", the vertical sync. signal start position is 35 (line) as shown in 8-3. *in case of lower frequency, the deterioration of the display quality, flicker etc., may occur. 8-2. input data signals and display position on the screen ? ? ? ?o ?o ?o ? ? ? ? www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 9 m019070 ???????????????????????????????? 8-3. input timing characteristics ? *1 when enab is fixed at "low", the horizontal display starts from the data of c144 (clock). ? *2 when enab is fixed at "low", the vertical sync. signal start position is 35 (line). 9. backlight characteristics led ratings item symbol min. typ. max. unit note forward current *1 if - 15 - ma ta=-20 ? 70c - 22.1 25.0 v if=15ma, ta=-20 ? - 21.7 24.5 v if=15ma, ta=25 ? forward voltage *1 vf - 21.3 24.1 v if=15ma, ta=70 ? operating life time *2, *3 t - 40,000 - h if=15ma, ta=25 ? *1 for each ?an1-ca1?, ?an2-ca2? and ?an3-ca3? *2 when brightness decrease 50% of initial brightness. *3 life time is estimated data . (condition : if=15ma, ta=25 ? in chamber). * an input current below 5.0ma may reduce the brightness uniformity of the led backlight. this is because the amount of light from each led chip is different. therefore, please evaluate carefully before finalizing the input current. (;(? 5()3,?:0.5(3 ? ? e? 690a65;(3?:@5*? ? ?
e? 7 ? ? : ? */ ? +: ? +/ ? ? ? ? y? ? ,9;0*(3?05=(30+?+(;(?7,906+ ? ? : ? + ? 7 ? 7 ? ? ? ? + ? ? ? ? ?? ?
36*2?:05.(3 ? ?
e? (;(?:0.5(3? ??? ? ? ? e? (;(? 5()3,?:0.5(3 ? ? e? ,9;0*(3?:@5*? ? :0.5(3? ?
e? 690a65;(3? @5*??:0.5(3? ?
e? (;(?:0.5(3? ??? ? ? ? e? ,9;0*(3?05=(30+?+(;(?7,906+ ? number of h-data
? ?
?
?? ? ?305, ? 305, ?? ? ????????? ???????? ? 305, ? ?t ? ? ? ?t ? ? ? ? ? ? ? ?t ? ?t ? ?t ? ? ? ? ? ? ? ?t ? ? ? ? ? * ? 690a65;(3?05=(30+?+(;(?7,906+? ? ? ? ? ?t ? / ? / ? ? ? ?t ? ? ? ? ? ? ?
36*2?:0.5(3 ? ?
e? : ? / ? ?t ? ? ? 690a65;(3?05=(30+?+(;(?7,906+ ? www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 10 m019070 ???????????????????????????????? 10. lot number identification ? the lot number shall be indicated on the back of the backlight case of each lcd. TCG057VGLBA-G00 - - - made in ???? ??????? ? 1 2 3 4 5 ?? year 2008 2009 2010 2011 2012 2013 code 8 9 0 1 2 3 month jan. feb. mar. apr. may jun. code 1 2 3 4 5 6 month jul. aug. sep. oct. nov. dec. code 7 8 9 x y z 11. warranty ? 11-1. incoming inspection ?? please inspect the lcd within one month after your receipt. ? ? 11-2. production warranty ?? kyocera warrants its lcd?s for a period of 12 months from the ship date. kyocera shall, by mutual agreement, replace or re-work defective lcd?s that are shown to be kyocera?s responsibility. no1. - no5. above indicate 1. year code 2. month code 3. date 4. version number 5. country of origin (japan or china) www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 11 m019070 ???????????????????????????????? 12. precautions for use 12-1. installation of the lcd 1) a transparent protection plate shall be added to protect the lcd and its polarizer. 2) the lcd shall be installed so that there is no pressure on the lsi chips. 3) the lcd shall be installed flat, without twisting or bending. 4) a transparent protection sheet is attached to the polarizer. please remove the protection film slowly before use, paying attention to static electricity. 12-2. static electricity 1) since cmos ics are mounted directly onto the lcd glass, protection from static electricity is required. 2) workers should use body grounding. operator should wear ground straps. 12-3. lcd operation 1) the lcd shall be operated within the limits specified. operation at values outside of these limits may shorten life, and/or harm display images. 12-4. storage 1) the lcd shall be stored within the temperature and humidity limits specified. ? store in a dark area, and protect the lcd from direct sunlight or fluorescent light. 2) always store the lcd so that it is free from external pressure onto it. 12-5. usage 1) do not store in a high humidity environment for extended periods. polarizer degradation bubbles, and/or peeling off of the polarizer may result. 2) the front polarizer is easily scratched or damaged. prevent touching it with any hard material, and from being pushed or rubbed. 3) the lcd screen may be cleaned by wiping the screen surface with a soft cloth or cotton pad using a little ethanol. 4) water may cause damage or discoloration of the polarizer. clean condensation or moisture from any source immediately. 5) always keep the lcd free from condensation during testing. condensation may permanently spot or stain the polarizer. 6) do not disassemble lcd module because it will result in damage. 7) this kyocera lcd module has been specifically designed for use in general electronic devices, but not for use in a special environment such as usage in an active gas. ? hence, when the lcd is supposed to be used in a special environment, evaluate the lcd thoroughly beforehand and do not expose the lcd to chemicals such as an active gas. 8) please do not use solid-base image pattern for long hours because a temporary afterimage may ??? appear. we recommend using screen saver etc. in cases where a solid-base image pattern must ??? be used. 9) liquid crystal may leak when the module is broken. be careful not to let the fluid go into your eyes and mouth. in the case the fluid touches your body ; rinse it off right away with water and soap. www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp30-03 part no. TCG057VGLBA-G00 page 12 m019070 ???????????????????????????????? 13. reliability test data ?? te st ite m te st co ndi tio n te st ti me judge me nt high temp. atmosphere 80c 240h display function display quality current consumption : no defect : no defect : no defect low temp. atmosphere -30c 240h display function display quality current consumption : no defect : no defect : no defect high temp. humidity atmosphere 40c 90% rh 240h display function display quality current consumption : no defect : no defect : no defect te mp. cycle -30c r.t. 80c 0.5h 0.5h 0.5h 10cycles display function display quality current consumption : no defect : no defect : no defect high temp. operation 70c 500h display function display quality current consumption : no defect : no defect : no defect * each test item uses a test lcd only once. the tested lcd is not used in any other tests. * the lcd is tested in circumstances in which there is no condensation. * the reliability test is not an out-going inspection. * the result of the reliability test is for your reference purpose only. ?? the reliability test is conducted only to examine the lcd's capability. www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
??????????????????????????????????????? ? spec no. tq3c-8eaf0-e2ddp30-00 date september 8, 2007 k y o c e r a i n s p e c t i o n s t a n d a r d t y p e : t c g 0 5 7 v g l b a - g 0 0 kyocera corporation ? kagoshima hayato plant lcd division designed by : engineering dept. co nfirmed by : qa dept. original issue date prepared checked approved checked approved september 8, 2007 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e2ddp30-00 part no. TCG057VGLBA-G00 page - revision record designed by : engineering dept. confirmed by : qa dept. date prepared checked approv ed checked approved rev.no. date page descriptions www.datasheet.co.kr datasheet pdf - http://www..net/
? ? spec no. tq3c-8eaf0-e2ddp30-00 part no. TCG057VGLBA-G00 page 1 ? ??????????????????????????????????????????????????????????????? ???????? ? visuals specification 1) note note 1. customer identified anomalies not defined within this inspection standard shall be reviewed by kyocera, and an additional standard shall be determined by mutual consent. 2. this inspection standard about the image quality shall be applied to any defect within the active area and shall not be applicable to outside of the area. general 3. inspection conditions luminance inspection distance temperature direction ?????? : 500 lux min. : 300 mm. : 25 ? 5 ? : directly above bright dot defect the dot is constant ly ?on? when power applied to the lcd, even when all ?black? data sent to the screen. inspection tool: 5% transpar ency neutral density filter. count dot: if the dot is visible through the filter don?t count dot: if the dot is not visible through the filter ?? dot defect black dot defect the dot is constantly ?off? when power applied to the lcd, even when all ?white? data sent to the screen. dot defect adjacent dot adjacent dot defect is defined as two or more bright dot defects or black dot defects. ?? dot defect bubble, scratch, foreign particle (polarizer, cell, backlight) visible operating (all pixels ?black? or ?white?) and non operating. external inspection appearance inspection does not satisfy the value at the spec. others led wire damaged to the le d wire, connector, pin, functional failure or appearance failure. definition of inspection item definition of size definition of circle size 31 ( 01 )/2 definition of linear size www.datasheet.co.kr datasheet pdf - http://www..net/
? ? spec no. tq3c-8eaf0-e2ddp30-00 part no. TCG057VGLBA-G00 page 2 ? ??????????????????????????????????????????????????????????????? ???????? ? 2) standard classification inspection item judgement standard bright dot defect acceptable number bright dot spacing : 4 : 5 mm or more black dot defect acceptable number bright dot spacing : 5 : 5 mm or more bright dot defect acceptable number : 2 2 dot join black dot defect acceptable number : 3 3 or more dots join acceptable number : 0 dot defect total dot defects acceptable number : 5 max defect (in lcd glass) others white dot, dark dot (circle) size (mm) a cce p table number 0.2 ? d ? 0.2 (ne g lected) 0.2 ? d ? 0.4 5 0.4 ? d ? 0.5 3 0.5 ? d ? 0.4 0 polarizer (scratch) width (mm) len g th (mm) a cce p table number 0.1 ? w ? 0.1 ?,.3,*;,+e 2.0 ? l ? 5.0 ?,.3,*;,+e 0.1 ? w ? 0.3 5.0 ? l ? 5.0 0 0.3 ? w ? 0.3 0 polarizer (bubble) size (mm) a cce p table number 0.2 ? d ? 0.2 (ne g lected) 0.2 ? d ? 0.3 5 0.3 ? d ? 0.5 3 0.5 ? d ? 0.4 0 foreign particle circle shape size (mm) a cce p table number 0.2 ? d ? 0.2 (ne g lected) 0.2 ? d ? 0.4 5 0.4 ? d ? 0.5 3 0.5 ? d ? 0.4 0 external inspection (defect on polarizer or between polarizer and lcd glass) foreign particle linear shape scratch width (mm) len g th (mm) a cce p table number 0.00 ? w ? 0.03 ?,.3,*;,+e 2.0 ? l ? 2.0 ?,.3,*;,+e 2.0 ? l ? 4.0 3 0.03 ? w ? 0.1 0 4.0 ? l ? 5.0 0 0.1 ? w ? 0.3 (according to circular shape) www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of TCG057VGLBA-G00

	To Download TCG057VGLBA-G00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .